NSW2000-16T2GC

More Views

NSW2000-16T2GC
Ask a question

  • 16×10/100Mbps Ethernet ports
  • 2×Gigabit combo ports (RJ45 and SFP)
  • All 100Mbps ports support PoE
  • PoE complies with IEEE802.3af/at, up to 30W for single port
  • Up to 250m transmission distance on EXTEND mode
  • Easy to use, no need to configure
  • High quality with all metal housing

Description

Details

Item Description
Ports 16×10/100Base-TX autosensing Ethernet ports(all support PoE) 2×Gigabit combo ports (RJ45 and SFP)
Port attribute 10/100/1000Mbit/s transfer rate Half-duplex, full-duplex and auto-negotiation Auto MDI/MDIX
Standards IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X ANSI/IEEE 802.3 NWay IEEE 802.3x flow control IEEE 802.3af PoE IEEE 802.3at PoE
MAC 4K
Packet forwarding rate 6.55Mpps
Switching capacity 8.8Gbps
EXTEND mode Disabled: all ports can communicate with each other, and monitoring optimization is disabled. Enabled: Downlink ports can only communicate with uplink ports, monitoring optimization is enabled, and transmission distance can be extended to up to 250 meters.
Status LEDs Link/Act (steady green): link is normal Link/Act (flashing green): data is being forwarded Link/Act (off): no link
PoE (steady orange): the port is powering a powered device properly PoE (off): the port is not connected to any powered device or is not supplying power
Power (steady green): AC input is normal Power (off): AC input is abnormal
PoE 802.3at/af Max PoE capacity: 250 W
Consumption ≤ 300 W
AC voltage 100-240 V
Operating temperature 0°C-40°C (32°F-104°F)
Operating humidity 10%-85%
Storage temperature -10°C-70°C (14°F-158°F)
Storage humidity 10%-90%
Dimensions (W×D×H) 440mm×280mm×44mm (17.3"×11"×1.7")
Additional Information

Additional Information

Specifications

Specsheet Download

Featured No
Reviews
Product Questions

Product Questions

No Questions