Power Over Ethernet

The GV-PA901 is a Power over Ethernet (PoE) adapter designed to provide power to the IP camera through a single Ethernet cable. Adopting the PoE adapter enables you to mount an IP camera anywhere in a building where power outlets are not available. Learn More

• Multiple working modes to address your business needs: Default(Normal mode), VLAN(Secure mode), EXTEND(Surveillance mode)
• Support port traffic control
• Support for secure mode, all downlink ports can communicate only with uplink ports
• Up to 250m transmission distance on surveillance mode
• Support buffer optimization
• All metal housing, safe and reliable

Learn More

• Multiple working modes to address your business needs:Normal, Secure and Surveillance

  Support port traffic control

  Support for secure mode, all downlink ports can communicate only with uplink ports

  Up to 250m transmission distance on surveillance mode

  Support buffer optimization

  All metal housing, safe and reliable

Learn More

The USW-16-POE is a configurable Gigabit Layer 2 switch with sixteen Gigabit Ethernet ports including eight auto-sensing 802.3at PoE+ ports, and two SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options to your enterprise network. The USW-16-POE features a 1.3" touch LCM to provide status information. With a depth of 7.9", the compact fanless design can be easily installed in a SOHO rack cabinet. Managed and configured by the UniFi Network Controller with UniFi mobile app support, the USW-16-POE offers an extensive suite of advanced Layer 2 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere. Learn More

• Multiple working modes to address your business needs:Normal, Secure and Surveillance

  Support port traffic control

  Support for secure mode, all downlink ports can communicate only with uplink ports

  Up to 250m transmission distance on surveillance mode

  Support buffer optimization

  All metal housing, safe and reliable

Learn More

• 1 Port at 10/100/1000 Mbps
• 30W Max Power
• Compatible with IEEE 802.3at/ PoE +
• Easy Installation - Parallel Slide-in Design
• Partial Discharge Detection
• Supports Base-T Lan Environment
• Safety Protection on Low Power Devices

Learn More

Ethernet Surge Protector Dimensions: 91 x 61 x 32.5 mm (3.58 x 2.4 x 1.28") Weight: 80 g (2.82 oz) Interface Connections: (2) RJ45 Female Connectors ESD/EMP Protection: Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs DC Spark-Over Voltage: 90V @ 100V/s Maximum Impulse Spark-over Voltage 700V @ 1kV/µs Discharge Current: 5kA (Maximum) 0.5kA (Normal) Maximum Insulation Resistance: 1G ohm @ 50V Maximum Capacitance :1.0 pF @ 1 MHz Data Line Protection: RJ45 10/100/1000 Ethernet IEEE 802.3af PoE Support: Yes Shock and Vibration Certification: ETSI300-019-1.4 Standard Operating Temperature: -30 to 65° C (-22 to 149° F) Operating Humidity: 10 to 90% Noncondensing Learn More

• 16×10/100Mbps Ethernet ports
• 2×Gigabit combo ports (RJ45 and SFP)
• All 100Mbps ports support PoE
• PoE complies with IEEE802.3af/at, up to 30W for single port
• Up to 250m transmission distance on EXTEND mode
• Easy to use, no need to configure
• High quality with all metal housing

Learn More

• 24×10/100Mbps Ethernet ports
• 2×Gigabit combo ports (RJ45 and SFP
• All 100Mbps ports support PoE
• PoE complies with IEEE802.3af/at, up to 30W for single port
• Up to 250m transmission distance on EXTEND mode
• Easy to use, no need to configure
• High quality with all metal housing

Learn More