| Model |
NSW2020-6T-POE-IN |
NSW2020-10T-POE-IN |
NSW2020-16T1GT1GC-POE-IN |
NSW2020-24T1GT1GC-POE-IN |
| Ports |
6×100Mbps network ports (RJ45), including 4 PoE ports |
10×100Mbps network ports (RJ45), including 8 PoE ports |
16×100Mbps PoE ports (RJ45)+ 1×1000Mbps Gigaethernet ports +1×1000Mbps Combo ports |
24×100Mbps PoE ports (RJ45) + 1×1000Mbps Gigaethernet ports +1×1000Mbps Combo ports |
| Standards |
IEEE802.3,IEEE802.3u,IEEE802.3az,IEEE802.3x,IEEE802.3af,IEEE802.3at |
IEEE802.3,IEEE802.3u,IEEE802.3z,IEEE802.3ab,IEEE802.3x,IEEE802.3af,IEEE802.3at,IEEE802.3az |
| Switching capacity |
1.2Gbps |
2Gbps |
7.2Gbps |
8.8Gbps |
| Forwarding performance |
0.90Mpps |
1.49Mpps |
5.36Mpps |
6.55Mpps |
| Packet Buffer |
448Kbit |
448kbit |
4M bit |
4Mbit |
| MAC |
1K |
1K |
16K |
16K |
| Dimensions (W×D×H) |
107*101*25mm |
171*103*25mm |
440*195*44mm |
440*250*44mm |
| Weight |
0.19KG |
0.29KG |
2.12KG |
2.93KG |
| Power supply |
DC：48/51V |
AC: 100-240V, 50/60Hz |
| PoE |
802.3at/af （4/5+，7/8-） |
| Max. PoE Power |
Max capacity: 60W
Max capacity for single port: 30W |
Max capacity:88W
Max capacity for single port: 30W |
Max capacity: 225W
Max capacity for single port: 30W |
Max capacity: 370W
Max capacity for single port: 30W |
| Prior Ports |
1~2 |
1~2 |
1~8 |
1~8 |
| Cooling Fans |
0 |
0 |
1 |
1 |
| Operating temperature |
0°C-40°C (32°F-104°F) |
| Operating humidity |
10%～90% (noncondensing) |
| Storage humidity |
5%～90% (noncondensing) |
| Indicator |
POWER:
Steady on: AC input is normal
Off: No AC input |
| No PoE Indicator |
PoE:
Off: No PoE power supply
Steady on: PoE power supply is normal |
PoE-MAX：
off ：The POE power supply power of the whole machine is less than 80% of the specification
Steady on : The POE power supply power of the whole machine is greater than 85% of the specification |
LINK/ACT：
Off: No link
Steady on: Linked
Flashing: Transmitting data |
| Working Mode |
Default(Normal mode) : All ports can communicate with each other.
EXTEND(Surveillance mode): Transmission distance up to 250 meters. |
Default(Normal mode) : All ports can communicate with each other.
VLAN(Secure mode): Downlink ports can communicate only with uplink ports. Enabling PD keepalive function, the switch will restart the IPC via PoE power when the IPC sends no message in a period of time.
Extend(Surveillance mode): Transmission distance up to 250 meters. Downlink ports can communicate only with uplink ports. |
